- Seagate Ntfs Driver For Mac
- Seagate Ntfs Driver For Mac Os
- Ntfs Driver For Mac Wd
- Ntfs Driver For Mac Os
This driver provides write access for Seagate external drives in Mac OS without having to reformat. Double-click the NTFSforMac.dmg file you downloaded. Follow the onscreen instructions to complete the installation. COMPATIBLE OPERATING SYSTEMS. Mac OS 10.10 and above. If you work on a Mac computer and need to read or write files from HDD, SSD or a flash drive formatted under Windows, you need Microsoft NTFS for Mac by Paragon Software. Write, edit, copy, move and delete files on Microsoft NTFS volumes from your Mac. The solution is fast, seamless, and easy to use.
- Allows Mac to Windows communication
- Essential for writing files on NTFS drives
- Decent write speeds
- Additional features previously accessible through Disk Utility only
- Easy-to-understand user interface
- Unusual NTFS driver enable/disable feature
- Paid major updates
If you’ve ever tried to open a Windows file on a Mac – or vice versa – then you’ll already know the frustratingly impossible task that this is, especially if you’re using the drive format NTFS or New Technologies File System. Founded by a group of MIPT students in 1994, Germany-based software company Paragon Software Group develops hard drive management tools such as partition managers, boot managers, backup software and system duplication software alongside a driver for Mac that bridges the gap between Mac and Windows devices. Paragon NTFS for Mac promises read/write access to any version of Windows NTFS drives in your macOS for as low as $14.99 if you purchase the five-license pack. But before taking out your credit card, there’s up to 15 days for you to decide whether this is a worthy investment thanks to the available free trial. Or, if you jump on the deal and buy a license, your purchase will be protected by Paragon Software Group’s 30-day money back guarantee.
Full Interoperability Between a Mac and a Windows PC
Apple and Microsoft developed operating systems using different languages for writing files onto drives. Apple uses HFS+, also referred to as Mac OS Extended or HFS Extended. During WWDC 2017, however, Apple announced that with macOS High Sierra, the default file system for Macs is changing to the new Apple File System (APFS), a file system optimized for flash and solid-state drives. Since the introduction of Windows NT 3.1, Microsoft has used NTFS.
The problem is macOS lacks native support for NTFS: you can read data from drives formatted with the Windows NT file system, but cannot write to it. Just remember that moment when your friend brought their external drive to copy over the movies you promised, and you didn’t understand why you couldn’t drag and drop the file onto it.
Paragon NTFS for Mac Menu Bar
NTFS External Hard Drive Mounted
Paragon NTFS for Mac Release License Prompt 2
Paragon NTFS for Mac solves this problem. Just like its competitor, Finland-based software developer Tuxera, Paragon installs a low-level file system driver based on Paragon UFSD (Universal File System Driver) technology, which was specially developed to bridge incompatibility between Windows and macOS by providing full read/write access to any version of the NTFS file system (Windows NT 4.0, 2000, XP, 2003, Vista, 7, 8 and 10).
Successful installation will prompt a restart, and then the Paragon effect takes place: it displays a simple and easy-to-understand application window, which can be laupanched through the Preferences pane, from the Applications folder or by typing “Paragon NTFS” into Spotlight. To continue using the software, you’ll need to either activate it by logging in to the MyParagon Customer Portal or via Facebook.
Double-clicking on the icon opens up the app management interface, where you’ll see the physical and virtual volumes attached to your Mac, including mounted DMG images. The application window has two sections: volumes and operations. The latter is where you’ll find options such as mount/unmount, verify, erase and startup. Mounting and unmounting is available for any volume or image except the macOS system drive currently in use.
Just like the macOS native app, Disk Utility, Paragon NTFS for Mac has a verify option, enabling users to verify and fix errors on supported file systems. Since the repair requires unmounting the drive, as is the case with a startup drive, be sure to avoid using it with that disk. If you notice any issues with the startup drive, you should use Disk Utility to fix it in Recovery mode.
The “Erase” option allows users to reformat the attached volume into file systems supported by macOS, while clicking on the startup option will let you select a system startup volume.
Mounting NTFS Drive in Read-Only Mode
NTFS External Hard Drive Mounted
The “Ignore Ownership” (for NTFS drives) option is disabled by default to allow anyone to access data on mounted NTFS volumes, but you can select it to restrict access to a specific user or group.
Since a writing action occurs even when you read a file by default on NTFS files systems, the feature called “Last Access Time” will keep a record of the last time a folder was opened, read or changed. To keep this default feature enabled, tick “Save Last Access Time” on the mounted NTFS volume.
There are additional features that should come handy, too, such as “Dirty volumes processing”. We talk about a dirty NTFS volume if the system suffered a power interruption, an aborted restart or forced shutdown. Paragon NTFS for Mac will check and repair dirty NTFS volumes before mounting them. Of course, the feature can be disabled, but this isn’t recommended.
Enabling NTFS Write Mode
Alongside the “Uninstall” option, Paragon NTFS for Mac will give you quick access to enable or disable the installed driver. However, you need to click on the lock – which will prompt you for an administrator password – to toggle it on or off, though admittedly the situations where you would want to disable it are very limited since you can mount the NTFS drive as “read only” if needed.
There is an unusual feature due to the level of control that Paragon Software has. During our testing we noticed that if an NTFS drive was mounted while the driver was enabled, disabling the drive didn’t prevent writing to it. This is despite the fact that disabling the driver should prevent the user from writing files to any NTFS volume.
You will need to unmount the NTFS disk and then remount it for the setting to take effect. In our testing we were unable to write to the external NTFS drive after doing so, and the same goes for the other way round, too. If you mount an NTFS drive with Paragon NTFS for Mac disabled, the drive will become a read-only volume, and you will need to remount it again after enabling the driver.
This ‘feature’ aims to act as an emergency exit for worst-case scenarios, such as having an opened file with changes while the driver is disabled for some reason. This is possible due to the limited access permission to the data that Paragon has on volumes. To enable write mode on an NTFS disk, Paragon provides a low-level API for a Virtual File System. VFS is the link between the macOS kernel and a concrete file system. Since all original access permissions belong to macOS, even disabling the Paragon NTFS for Mac driver leaves writing to an NTFS formatted volume possible.
Paragon NTFS for Mac Speed Test
As advertised, the driver gives users read/write access to any version of Windows NTFS drives in your macOS, but the write speed still compares with the native macOS file system. Along with the built-in SSD of the MacBook Pro (late 2016), we used two external drives to put the Paragon NTFS for Mac to the test: an 8GB Kingston flash drive and a 1TB Seagate Backup Plus 5400 rpm drive.
In our testing we used two methods: copying a 4.11GB MKV file from Mac to NTFS, and the free Blackmagic Disk Speed Test software. We used a late-2008 iMac equipped with SSD to test the software.
NTFS Pen Drive Speed Test
Tuxera Driver: NTFS Flash Drive Speed Test
iMac's Native Read/Write Speed Test
Paragon NTFS for Mac Read/Write Speed Test MacBook Pro (late 2016)
We were able to copy the movie file on the Kingston drive in 9 minutes and 13 seconds, while the same files took 2 minutes and 27 seconds to copy onto the Seagate drive.
In the Blackmagic Disk Speed test, Paragon NTFS for Mac enabled 9.1MB/s write and 35.2MB/s read speeds on the Kingston pen drive. The Seagate drive showed different speeds: 28.2 MB/s write and 36.5MB/s read speeds. Testing the native read/write speeds of the iMac with the same software gave the following results: 89.5MB/s write and 266.4MB/s read speeds, and this changed to 1321.3MB/s write and 2272.9MB/s read speeds on our MacBook Pro (late 2016). Both the read and writing speeds of the NTFS formatted volume of the MacBook Pro matched that of the native HFS+ of the MacBook Pro’s internal SSD (PCI-E): 1318.2MB/s write and 2397.0MB/s read.
But there’s also an Easter egg that hardcore Mac fans will love: while it is copying a file to the NTFS drive, Finder displays January 24 1984 10:00 as “Date modified”. That was the date Apple co-founder Steve Jobs took to the stage to show off the very first Macintosh in a live demonstration.
Paragon NTFS for Mac retails for a flat fee per license per software version. This includes free updates for registered users and free online support for the lifetime of the version. Enabling write access to an NTFS drive will cost you $19.95 for a single Mac license. Buy five, and you’ll get the best value price: only $14.99 per license.
But you don’t have to show the money until you are 100% convinced that this is what you need. Paragon Software offers a 10-day trial (which can be expanded by up to a further five days by sharing the software link with your Facebook friends). Combine this with the 30-day money back guarantee and you have plenty of time to make a final decision.
- All features
- For 1 Mac Only
- 30-day money back guarantee
- All features
- For 3 Macs
- 30-day money back guarantee
- All features
- For 5 Macs
- 30-day money back guarantee
Also, if you already own a previous version of Paragon NTFS for Mac, there are a few upgrade options available:
- Owners of a commercial license of Paragon NTFS for Mac (not a free upgrade license) receive a Free upgrade to the next version of NTFS for Mac.
- Owners of a Free Upgrade license of Paragon NTFS for Mac receive 50% discount on the license price.
- If you own a version that’s two versions older than the current one, you’ll get 30% off on the license price when upgrading.
- User-friendly client
- Deep, effective cleaning options
- Versatile, user-oriented customer support
- 30-day money back guarantee
- Full review…
- Personalized, remote assistance
- Unique optimization tools
- Anti-theft tracking
- Built-in antivirus
- Full review…
- Fast scanning
- User-friendly UI
- Virus and malware scan
- Great cleaning features
- Full review…
Paragon Software accepts credit card payments from all of the major payment networks, Visa, Mastercard, American Express and JCB, as well as PayPal and wire transfer.
If you have any questions related to activation, the software’s features, or you just want to submit your feedback, then there are a few options available: in-app contact, a support forum and a knowledge base. Paragon Software recommends creating a MyParagon account to register the product and receive support via the forum. For activation-related issues, you can contact customer support by clicking in the top-left of the app and selecting “Contact Support”. As you hit the “Send Feedback” button, the backend system will create a ticket for your issue, which you can view online in your MyParagon account. Just don’t expect a speedy response.
Customer Support Requests Listed in MyParagon Account
Also, you can always turn to the support forums with your question, or read the knowledge base for frequently asked questions. Paragon also offers remote support: using TeamViewer a support engineer will connect to your computer to fix the problem manually or to collect data.
Is Paragon NTFS for Mac worth the price? Definitely. Anyone using Boot Camp or dual boot on their Mac (macOS and Windows) will find this software useful. Also, for those dealing with NTFS-formatted volumes frequently, this driver is a worthy purchase since it allows communication between the two platforms. While the slow write speed would benefit from being improved by Paragon Software, it is something that can be lived with, especially when considering that the competing Tuxera software offers no better writing speeds. Without this type of software you cannot write on an NTFS volume on Mac, meaning it will be almost necessary in these situations. And if Paragon deals with the enable/disable NTFS driver bug, it will be reliable software for regular daily use.
Best Alternative Mac Optimization Software
By Nathan E. Malpass, Last updated: September 14, 2019
Mac operating systems can read NTFS drives formatted on Windows. However, they don’t have the ability to write to them directly. In this article, we’ll give you both free and paid methods of getting total read/write access to that of NTFS drives.
This guide can be helpful when you wish to write to a Boot Camp partition within your Mac as partitions for the Windows system must utilize NTFS. If you need something for external drives, it is recommended that you use exFAT instead of NFTS. macOS can directly read and write to drives using exFAT like Windows do.
Three Options to Consider When Writing to NTFS Drives on Your Mac
There are multiple options you should consider when writing to NTFS drives using your Mac device. We will dig into these options later on. Take note that with some options, we’ll give you more than one method of doing it.
Third-Party Drivers (Paid)
Third-party NTFS drivers can be used on your Mac device. Usually, you need to install these drivers and they work perfectly. These paid solutions can be installed easily. Plus, they have better performance relative to free options.
Third-Party NTFS Drivers (Free)
To allow Mac support for writing to NTFS drives, you can opt for free, open-source drivers. They can be difficult to install compared to the paid versions. This is because of Mac’s System Integrity Protection feature. Free drivers are slower compared to paid versions. Plus mounting NTFS partitions automatically in read-write mode can be a threat to your security.
Experimental Apple Support For NTFS-Write
The operating system of Mac offers you experimental support for writing to that of NTFS drives. By default, this support is deactivated. You have to dig into the Terminal to activate it.
Using this method is not guaranteed. Plus, you can even mess around with your NTFS file system and cause issues. Some people who’ve tried it resulted in corrupt data. Thus, it is not recommended to use this method. There’s a reason for it being deactivated by default.
It is recommended that you purchase a third-party driver to write to NTFS drives on Mac as other solutions might be very tedious or dangerous.
Best Paid Third-Party NTFS for Mac: FoneDog’s PowerMyMac
FoneDog’s PowerMyMac is a multifunction tool that allows you to perform a variety of activities on your Mac. Aside from being able to clean your Mac of junk, it can also help youwrite files to NTFS drivesusing your beloved Apple computer.
Below are the steps on how to use this tool to write to NTFS drives on Mac:
Seagate Ntfs Driver For Mac
Step 01: Download, install and launch PowerMyMac on your computer and select Toolkit.
Step 02: Select NTFS.
Step 03: Press the Write button in order to copy, delete, edit, or perform other instructions on your files from Windows-formatted SDD, HDD, or flash drive.
It is important to remember that when a pop-up window labeled “Fail” is displayed on your screen, it is because you still have to install Osxfuse and NTFS – 3g on your Mac device. This is a prerequisite to using the NTFS tool.
Step 04: Now, you will be able to see USB information located on the left side of the screen. The right column lists the USB’s files and folders. You have to drag the file(s) you wish from the USB to the blank location on the interface.
Step 05: Press the button labeled Write. Now, the files you have dragged into the blank space will be transferred to your USB. Once a message pops up saying the process is complete, then writing to NTFS drives is now done.
Step 06: Unmount the USB drive from your Mac computer.
Now, that’s an easy way of writing to NTFS drives using your Mac. PowerMyMac by FoneDog is our top option as it’s the easiest to use. Let’s get into another paid driver before delving into the free methods for writing to NTFS drives.
Runner-Up Paid Third-Party NTFS Driver: Paragon NTFS for Mac
This tool can be purchased for USD 19.95 and provides you with a free trial for 10 days. It will easily and cleanly install on most recent versions of the Mac OS. For instance, it can be installed on Mac OS X El Capitan version 10.11 and macOS Sierra version 10.12.
It really works and does its job. Thus, it’s our second choice if you’re willing to shell out a small amount of cash to get its feature. With Paragon, you don’t need to fuss about terminal commands just to mount partitions manually, automatically do an insecure mount partition, or handle possible corruption as you might experience with free drivers shown below.
If you really need to write to NTFS drives on a Mac, it is best to pay for the software we have mentioned in this article. We are stressing out that it will definitely be worth it. Also, if you bought a Seagate drive, you can actually have a free download of Paragon NTFS for Mac. Thus, you don’t have to buy anything extra as Seagate offers it for free.
Another option would be Tuxera NTFS for Mac. This tool costs USD 31.00. Plus, they can give you a free trial for 14 days. However, PowerMyMac and Paragon do the same things for more features or cheaper costs.
How to Write to NTFS Drives for Mac For Free: Using FUSE for macOS
This is a free method that requires a bit of effort. Plus, it is less secure. To make your Mac device mount NTFS partitions automatically within a read-write mode, you have to deactivate System Integrity Protection temporarily. Plus, you also need to replace an Apple tool built into the system with a binary. This binary is highly vulnerable to malicious attacks. Thus, doing this is a risk to your security.
But, you can also use FUSE in order to “manually” mount NTF partitions within a read-write mode. This is the case if you’re willing to use the Terminal. This is more secure compared to the one above. However, it requires more work.
The first thing to do is to go to FUSE for macOS website and download it. After then, install the tool on your Mac. During the installation process, select the default options. Then, you’ll also need the command line developer tools of Apple. You can install this by going to Finder and then visiting Applications. After which, select Utilities and launch the Terminal window. In the said window, type the following command:
After this, click Install to begin the installation process.
In addition to the first two installations, you’ll also need to download homebrew if it isn’t in your Mac yet. This is a package manager designed for Mac OS X. Use the Terminal window again to install this package manager. Just type in the following command and then press Enter to start installing it:
After this, press Enter. If it asks for authentication, then type in your password. The script will download and then install Homebrew automatically on your Mac device. Once Homebrew and developer tools are installed using the Terminal window and run the following again in order to install Ntfs-3g:
Now, you can mount NTFS partitions within reading or write mode manually. Run the command below using a Terminal window. In this way, you will create a mount point located at /Volumes/NTFS. This will be done once only.
Once you connect your NTFS drive to the Mac computer, run the command below using Terminal in order to list the disk partitions:
Now, you will be able to determine the device name of your NTFS partition. You simply have to look for the said partition that has the Windows NTFS file system. It is probable that your Mac device has already mounted the NTFS partition automatically. Thus, you have to unmount it before doing anything else.
Run the command below. Replace the /dev/disk3s1 with the actual name of your NTFS partition device.
After unmounting it, you should mount the drive again. To do this, run the command below. Similar to the one above, you should replace /dev/disk3s1 with the NTFS partition device name.
By now, you’ll notice that the file system will be mounted at the location /Volumes/NTFS. It will also be displayed on your desktop as a regular mounted drive. If you wish to unplug the drive, you can eject it through the usual method of doing so.
If you think the above method works for you, then you don’t have to continue reading. However, if you want to use another free method, then read on.
If you want your Mac device to mount NTFS drives automatically within reading or write mode, you have to deactivate System Integrity Protection.
A Word Of Caution
You might not want to perform this method. The official instructions of the software state that this is a risk to your device’ security. When you do this, you will replace your Mac’s NTFS mount tools with that of the NTFS-3g tools. This will run like that of the root user. Because of the actual way Homebrew installs software on your device, the malware within your Mac can overwrite the said tools. It’s not worth it. However, we’ll still explain how to implement this method if you are willing to take risks.
First, you have to reboot your Mac device. Once you are doing so, press and hold the keys Command + R. It will display the recovery mode environment. Go to the utility menu within recovery mode and open the Terminal. Run the command below:
After this, reboot the Mac device again normally. From the desktop, launch Terminal again. Run the commands below in order for NTFS-3g to function:
Finally, reactivate System Integrity Protection. To do this, you simply reboot the Mac, press, and hold the keys Command + R. In this way, your recovery mode will be launched. Open the Terminal within recovery mode and run the command below:
Then, reboot your Mac computer once again. By now, the support for writing to your NTFS drive should be functioning.
In order to undo all changes you have made and also uninstall everything, you have to deactivate System Integrity Protection first. After doing this, run the commands below:
Then, you can simply uninstall FUSE by going to its panel within System Preferences. After this, you should reactivate System Integrity Protection. By now, you’ve realized why we recommend using PowerMyMac’s NTFS tool instead.
Experimental Support for NTFS-Writing by Apple(Free)
This method is the least tested. That’s why we seriously don’t recommend you to do it. We’ve warned you. So, do not put the blame on us or even on Apple especially if you run into issues in the future. This method is unstable and it might never be. The method is just included here for educational purposes.
First, you have to make sure that the drive has a label that uses a single word only. This is for convenience. If it has two words or more, then change it. This will ensure that the process becomes easier.
Visit Finder and then go to Applications. Then, go to Utilities and open Terminal. Type the command below using the Terminal. In this way, the /etc/fstab file will be opened. The said file will be used to edit within a nano text editor.
The line below should be added to nano. Replace the word “DEVICENAME” with your NTFS drive’s label:
Seagate Ntfs Driver For Mac Os
Once you’re finished, press the keys Control + O in order to save the said file. After this, press Control + X to exit nano. If you wish to write to more than one NTFS drive, simply add another line for each one.
Now, you should connect the NTFS drive to your computer. If it is already connected, just unplug it and plug it back again. You should be able to see it within the directory “/Volumes.” To do this, use a Finder window and press Go. After this, click Go To Folder. Type out “/Volume” within the box to gain access to it. Typically, it will not be automatically displayed within Desktop like that of normal drives.
Later, you can simply undo the change you’ve made. Simply repeat the process above to launch the /etc/fstab file within nano. The line, you’ve placed in the file? Just delete it and save the new changes.
This guide is here to help you learn how to write to NTFS drives on Mac. Both free and paid methods were outlined here. It is recommended that you opt for the paid methods (e.g., PowerMyMac) in order to get this feature. In this way, you don’t have to risk the performance of your Mac and even potentially face file corruption.